Baylis RFA-FS Footswitch for use with RFP-100A Puncture Generator, Box of 01

INDICATIONS FOR USE

• The Footswitch is to be used with the RFP-100A Generator.

DEVICE DESCRIPTION

• The RFP-100A Footswitch (Footswitch) is used with the RFP-100A Baylis Medical Company Radiofrequency Puncture Generator (RFP-100A Generator) for RF energy delivery.
• The Footswitch is provided with redundant micro switches and is used as an alternative to the RF On/Off button on the RFP-100A Generator for RF energy delivery.

CONNECT FOOTSWITCH (OPTIONAL)

• If the footswitch is to be used with Generator, it must be connected to the Generator rear panel.
• Line up the four (4) pin footswitch connector with the footswitch connection. Rotate the connector until it slides and clicks into place. A light tug on the cable can confirm that the connector is properly seated.
• To disconnect the footswitch from the Generator, grasp the connector housing and gently pull it straight out of the receptacle. The connector housing slides backwards to disengage the locking mechanism.
• Never disconnect the footswitch by pulling on the cable cord.